Used non-selectively locate and lock into type “XN” landing nipples.
The “BPXN” type lock mandrels utilize various equalizing assemblies depending on the desired application.
Type “BPXN” lock mandrels are typically used in applications where the pressure differential does not exceed 4000 psi, or 28 MpA. The BPXN is capable of higher pressure due to the no-go in the XN nipple.
Applications:
Used with various equalizing assemblies to blank off pressure of production tubing.
Used to deploy check valves, standing valves, or velocity strings in the tubing string.
Used to deploy bottom hole chokes into the tubing string.
Used to deploy or hang bottom hole instruments in the wellbore.
Size | 1.25" | 1.50" | 1.62" | 1.87" | 2.31" |
Fishneck ID (") | 0.875 | 1.062" | 1.062" | 1.375" | 1.81" |
Fishneck ID (mm) | 22.22mm | 26.97m | 26.97mm | 34.93 | 45.97 |
Minimum ID (") | 0.62" | 0.75" | 0.75" | 1.00" | 1.375" |
Minimum ID mm | 15.75mm | 19mm | 19mm | 25.4mm | 34.93mm |
Maximum OD (") | 1.235" | 1.46" | 1.585" | 1.835" | 2.275" |
Maximum OD (mm) | 31.37mm | 37.10mm | 40.26mm | 46.61mm | 57.79mm |
Lower Thread Conn. | 0.875"-20 UN | 1.125"-16UN | 1.125-16UN | 1.375-14UN | 1.75"-12UN |
Size | 2.75" | 2.81" | 3.31" | 3.81" | 4.56" | |
Fishneck ID (") | 2.31" | 2.31" | 2.625" | 3.125" | 4.187" | |
Fishneck ID (mm) | 58.67mm | 58.67mm | 66.68mm | 79.38mm | 106.35 | |
Minimum ID (") | 1.75" | 1.75" | 2.125" | 3.125" | 3.125" | |
Minimum ID mm | 44.45mm | 44.45mm | 53.98mm | 79.38mm | 79.38mm | |
Maximum OD (") | 2.715" | 2.78" | 3.24" | 3.75" | 4.484" | |
Maximum OD (mm) | 68.96mm | 70.61mm | 82.55mm | 95.25mm | 113.89mm | |
Lower Thread Conn. | 2.25"12-SLB | 2.25"-12SLB | 2.75"-12SLB | 3.062-12SLB | 4.00-12SLB |
*Smaller or larger sizes available upon request, as well as custom materials
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING
Pressure Controls Inc.
3904 – 53rd Avenue NW
Edmonton, Alberta
T6B 3N7
780-670-2020
Office hours are Monday to Friday
8:00 am to 4:30 pm.
DISCLAIMER: TRADEMARKS: Halliburton, Otis, Baker, and Camco as well as any related products referenced herein are either trademarks or registered trademarks of the forementioned. Other product and company names mentioned herein may be trademarks of their respective owners