Menu

EQUALIZING ASSEMBLIES

BRO Equalizing Assembly

Used in conjunction with a “R / RN” lock mandrel to hold differential pressure from above below the plug assembly in the wellbore. Designed to be installed or retrieved in a single run application. The collet is actuated by probes attached to the running or pulling tools.

The R equalizing assembly is typically used in higher pressure scenarios as the lock mandrels and equalizing assemblies are designed to facilitate higher working pressures.

 

Applications:

 

Used during routine maintenance of the wellbore, typically to suspend production or preform maintenance on the wellbore.

Used to blank the production tubing off during the installation of workover BOP

Used when there may be a sand or debris issue that would hinder conventional plugs that require the use of multiple runs or utilize equalizing prongs such as PR Plug.

Used to retrieve tubing from the wellbore during snubbing operations.

Size1.71"1.78"1.87"2.00"2.125"2.188"
Over all Length (")8.25"8.25"8.25"8.25"8.25"8.25"
Over all Length mm209.55mm209.55mm209.55mm209.55mm209.55mm209.55mm
Maximum OD (")1.705"1.771"1.865"1.995"2.115"2.18"
Maximum OD (mm)43.31mm44.98mm47.37mm60.67mm53.72mm55.37mm
Upper Thread Conn.1.125-16UN1.375-14UN1.375-14UN1.375-14UN1.375-14UN1.75-12UN
Size2.31"2.56"2.75"2.81"3.43"3.688"
Over all Length (")8.25"8.25"8.25"8.25"8.25"8.25"
Over all Length mm209.55mm209.55mm209.55mm209.55mm209.55mm209.55mm
Maximum OD (")2.30"2.55"2.74"2.80"3.42"3.680"
Maximum OD (mm)58.42mm64.77mm69.59mm71.12mm86.87mm93.47mm
Upper Thread Conn.1.75-12UN2.00-12SLB2.25-12SLB2.25-12SLB2.75-12SLB3.062-12SLB

*Smaller or larger sizes available upon request, as well as custom materials

PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING

Scroll Up