The cam cutters purpose is to cut or sever wire or cable lodged in the wellbore.
The cam cutter functions by actuating a cam using past a hardened toolsteel cutter block.
The wire or cable is sheared when the cam passes the cutter block.
A narrow slot is cut in the cam, bean and two piece to retain the wire or cable, the bean is held in place with shear pins to mitigate premature shearing of the line.
Once the cam cutter impacts a solid obstruction, the shear pins are sheared, the bean actuates the cam and the the line is sheared between the cutter block and the cam.
The body O.D. measurements are affected by the tubing size, threaded guides may be utilized on the drop bars of the cam cutter.
Cutting wireline, slickline, or cable at the top of a rope sockets that may have become stuck in the wellbore.
Cutting wireline, slickline, or cable from the top of Go-Devils in the wellbore.
|Fishneck dropbar (")||1.375"|
|Over all Length (")||8.00"|
|Over all Length (mm)||203mm|
|Drop Bar Length||18" / 3' / 5'|
|Drop Bar Length (cm)||45 / 91 / 152|
|Maximum OD (")||1.625"|
|Maximum OD (mm)||41.23mm|
*Available with locator rings to centralize in the wellbore
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING