The fingered overshot is utilized when there is a probability of damage to a fishneck, or if there is debris that may hinder the use of a conventional pulling tool with a skirt.
The 4 fingered overshot consists of a body with 4 fingers proportioned to the size of a standard fishneck.
The fingered overshot latches positively when engaged, meaning there is no shear mechanism, if this is desired then a bait sub should be ran as well.
Gaps between the fingers allow for debris to be displaced so the fingers or dogs may engage the fishneck.
Applications:
The 4 fingered overshot may be used during fishing operations when there may be wire or other debris on top of the fish.
The 4 fingered overshot may also be used when there may be sand, scale or other particulate on top of the fish.
Size | 2.375" | 2.875" | 3.50" | 4.50" |
Thread Connections | 0.938-10 UN | 0.938-10 UN | 1.062-10 UN | 1.062-10 UN |
Fishneck (") | 1.375" | 1.375 | 1.75" | 2.31" |
Fishneck (mm) | 34.92mm | 34.92mm | 45.45mm | 58.64mm |
Fishneck Engaged(") | 1.375" | 1.75" | 2.31" | 3.125" |
Fishneck Engaged (mm) | 34.92mm | 45.45mm | 58.64mm | 79.37mm |
Reach (") | 5.00" | 5.00" | 5.00" | 5.00" |
Reach (mm) | 127mm | 127mm | 127mm | 127mm |
Size | 3.00" | 4.50" | 5.00" | 5.50" | 7.00" |
Upper Thread | 1.062-10 UN | 1.062-10 UN | 1.062-10 UN | 1.062-10 UN | 1.062-10 UN |
Fishneck (") | 2.31" | 2.31" | 3.12" | 3.12" | 3.12" |
Fishneck (mm) | 44.45mm | 44.45mm | 79.38mm | 79.38mm | 79.38mm |
Over all Length (")* | 8.00" | 8.00" | 10.00" | 10.00" | 10.00" |
Over all Length (mm)* | 203.2mm | 203.2mm | 254mm | 254mm | 254mm |
Maximum OD (") | 2.867 | 3.965 | 4.435" | 4.91 | 6.41" |
Maximum OD (mm) | 72.82mm | 100.7mm | 112.65mm | 124.97mm | 162.81 |
*Custom sizes available.
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING
Pressure Controls Inc.
3904 – 53rd Avenue NW
Edmonton, Alberta
T6B 3N7
780-670-2020
Office hours are Monday to Friday
8:00 am to 4:30 pm.
DISCLAIMER: TRADEMARKS: Halliburton, Otis, Baker, and Camco as well as any related products referenced herein are either trademarks or registered trademarks of the forementioned. Other product and company names mentioned herein may be trademarks of their respective owners