The GR / GU Adapter is designed to adapt a conventional jar down to shear GS type pulling tool to a jar up to shear pulling tool.
The shear pin must be removed from the GS type pulling tool and a shear pin installed into GR / GU adapter to make the conversion complete.
Applications:
The GR / GU adapter is utilized to pull tools such as bottom hole chokes, lock mandrels, junk catchers, or bait subs that have debris in around the fishing neck which may hinder the shearing process of a conventions jar down GS type pulling tool.
The GR / GU adapter may also be used when there is a need to jar down on a sub surface tool which would ultimately shear a conventional GS type pulling tool.
Size | 2.00" | 2.50" | 3.00" |
Upper Thread Conn. | 0.938-10UN | 0.938-10 UN | 1.062-10 UN |
Fishneck OD (") | 1.375" | 1.375" | 1.75" |
Fishneck OD (mm) | 34.93mm | 34.93mm | 44.45mm |
Over all Length (") | 10.50" | 10.50" | 10.50" |
Over all Length mm | 270.50mm | 270.50mm | 270.50mm |
Maximum OD (") | 1.75" | 2.125" | 2.75" |
Maximum OD (mm) | 44.45mm | 53.98mm | 69.85mm |
Lower Thread Conn. | 0.938-10UN | 0.938-10UN | 1.062-10UN |
*Smaller or larger sizes available upon request.
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING
Pressure Controls Inc.
3904 – 53rd Avenue NW
Edmonton, Alberta
T6B 3N7
780-670-2020
Office hours are Monday to Friday
8:00 am to 4:30 pm.
DISCLAIMER: TRADEMARKS: Halliburton, Otis, Baker, and Camco as well as any related products referenced herein are either trademarks or registered trademarks of the forementioned. Other product and company names mentioned herein may be trademarks of their respective owners