Roller stem is used t allow for easier deployment of subsurface equipment into deviated wellbores
by allowing the weight of the toolstring to rest upon wheels that travel down the ID of the tubing or
casing In the wellbore.
Roller stem can typically be converted from one size to another by changing out the rollers.
Applications:
Roller stem may be used to deploy bottom hole instruments or tools into deviated or horizontal wellbores.
Roller stem may be used to mitigate drag in deviated, dog legged, or non vertical wellbores.
Size | 0.75" | 1.00" | 1.25" | 1.50" | 1.75" |
Thread Connections | 0.50-11 UNC | 0.938-10 UN | 0.938-10 UN | 1.062-10 UN | 1.062-10 UN |
Fishneck (") | 0.75" | 1.00" | 1.187" | 1.375 | 1.75" |
Fishneck (mm) | 19.05mm | 25.4mm | 30.14mm | 34.93mm | 44.45mm |
Maximum OD (") | 1.25" | 1.375" | 1.50" | 2.25" | 2.50" |
Maximum OD (mm) | 31.75mm | 34.93mm | 38.10mm | 57.15mm | 63.15mm |
Length (feet) | 2' / 3' / 5' | 2' / 3' / 5' | 2' / 3' / 5' | 2' / 3' / 5' | 2' / 3' / 5' |
length (centimeters) | 60 / 90 / 152 | 60 / 90 / 152 | 60 / 90 / 152 | 60 / 90 / 152 | 60 / 90 / 152 |
Size | 1.875" | 2.125" |
Upper Thread | .625 UNC | 0.938-10 UN |
Fishneck (") | 1.75" | 1.75" |
Fishneck (mm) | 44.45mm | 44.45mm |
Maximum OD (") | 2.75" | 2.125" |
Maximum OD (mm) | 69.85mm | 79.37mm |
Length (feet) | 2' / 3' / 5' | 2' / 3' / 5' |
Length (centimeters) | 60 / 90 / 152 | 60 / 90 / 152 |
*Alternate thread configurations, sizes, and lengths available upon request
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING
Pressure Controls Inc.
3904 – 53rd Avenue NW
Edmonton, Alberta
T6B 3N7
780-670-2020
Office hours are Monday to Friday
8:00 am to 4:30 pm.
DISCLAIMER: TRADEMARKS: Halliburton, Otis, Baker, and Camco as well as any related products referenced herein are either trademarks or registered trademarks of the forementioned. Other product and company names mentioned herein may be trademarks of their respective owners