Menu
Wedge type rope sockets are used to attached or secure slickline or wireline to the toolstring
to allow for deployment of sub-surface tools and equipment.
Line is attached to the rope socket by wrapping it around a wedge and pinching it with a taper.
Rope sockets come with fish necks so they can be retrieved with conventional tools
should the wireline or slickline be broken or cut.
| Size | 0.75" | 1.00" | 1.25" | 1.50" | 1.75" |
| Fishneck (") | 0.75" | 1.00" | 1.187" | 1.375 | 1.75" |
| Fishneck (mm) | 19.05mm | 25.4mm | 30.14mm | 34.93mm | 44.45mm |
| Maximum OD (") | 0.75" | 1.00" | 1.25" | 1.50" | 1.75" |
| Maximum OD (mm) | 19.05mm | 25.4mm | 31.75mm | 25.4mm | 44.45mm |
| Lower Thread Conn. | 0.50-11 UNC | 0.625-13UNC | 0.938-10 UN | 1.062-10 UN | 1.062-10 UN |
| Size | 1.875" | 2.125" | 2.50" | 2.75" |
| Fishneck (") | 1.75" | 1.75" | 2.31" | 2.31" |
| Fishneck (mm) | 44.45mm | 44.45mm | 58.67mm | 58.67mm |
| Maximum OD (") | 1.875" | 2.125" | 2.50" | 2.75" |
| Maximum OD (mm) | 47.62mm | 53.98mm | 63.50mm | 69.85mm |
| Lower Thread Conn. | 1.062-10 UN | 1.062-10 UN | 1.062-10 UN | 1.062-10 UN |
*Alternate thread configurations and sizes available upon request
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING
Pressure Controls Inc.
3904 – 53rd Avenue NW
Edmonton, Alberta
T6B 3N7
780-670-2020
Office hours are Monday to Friday
8:00 am to 4:30 pm.
DISCLAIMER: TRADEMARKS: Halliburton, Otis, Baker, and Camco as well as any related products referenced herein are either trademarks or registered trademarks of the forementioned. Other product and company names mentioned herein may be trademarks of their respective owners
