Menu

COMPLETION EQUIPMENT

Sliding Side Door (Elastomeric)

Sliding Side Doors, or Sliding Sleeves are downhole tubular equipment used mainly in multizone gas completions, or between packers isolating different producing zones. 

Sliding side doors come in two different configurations, UP to OPEN, and DOWN to OPEN, this designates which way the inner sleeve must travel to align the inner and outer ports of the sliding sleeve to allow for communication between the tubing and annulus. 

Sliding sleeves also come in two different style, ELASTOMERIC, and NON-ELASTOMERIC, elastomeric sliding side doors are typically used in moderate pressure wellbore conditions, typically not exceeding 200 ° Celsius or 400° Fahrenheit, and 35 MpA, or 5000 PSI. 

Sliding side doors may also come with our without profiles depending on the wellbore requirements. 

Standard Information2.3752.8753.50
Tubing ID "1.9952.4412.992
Tubing ID - mm50.676276
Tubing Weight lbs/ft4.66.49.2
Tubing weight Kg/M6.849.52313.689
Max OD"3.0636.6884.5
Max OD - mm77.893.17114.3
Weight lbs456080
Weight KG202736
Upper Box Connection2.375 EUE2.875 EUE3.50 EUE
Lower Pin Connection2.375 EUE2.875 EUE3.50 EUE
Upper Seal Bore ID1.875"2.313"2.813"
Lower Seal Bore ID1.875"2.313"2.813"

*Smaller or larger sizes available upon request, as well as custom materials, and a wide range of thread specs.

PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING

Scroll Up