Menu

EQUALIZING ASSEMBLIES

TKX Equalizing Assembly

Used in conjunction with a “X / XN” lock mandrel to hold differential pressure from below the plug assembly in the wellbore. Designed to utilize a metal to metal single point seal as well as a dual O-ring  back up   should the metal to metal seal be compromised.

The TKX equalizing assembly is typically used in lower pressure scenarios as the lock mandrels and

Equalizing assemblies are designed to facilitate mid range working pressures.

The injection bean and cage assembly may also utilize a “X” equalizing assembly rather than a kobes.

 

Applications:

 

Used during routine maintenance of the wellbore, typically to suspend production or preform maintenance on the wellbore.

Used to blank the production tubing off during the installation of workover BOP

Used as a circulating device during fishing operations.

Used to retrieve tubing from the wellbore during snubbing operations.

Size1.50"1.62"1.87"2.31"
Over all Length (")8.75"8.75"8.75"8.75"
Over all Length mm222.75mm222.75mm222.75mm222.75mm
Maximum OD (")1.495"1.615"1.865"2.30"
Maximum OD (mm)38.10mm41.02mm47.37mm58.42mm
Upper Thread Conn.1.125-16UN1.125-16UN1.375-14UN1.75-12UN
Size2.75"2.81"3.31"3.81"
Over all Length (")8.75"8.75"8.75"8.75"
Over all Length mm222.75mm222.75mm222.75mm222.75mm
Maximum OD (")2.74"2.80"3.30"3.805"
Maximum OD (mm)69.59mm71.12mm83.82mm96.65mm
Upper Thread Conn.2.25-12SLB2.25-12SLB2.75-12SLB3.062-12SLB

*Smaller or larger sizes available upon request, as well as custom materials

PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING

Scroll Up