Tube jars are mechanical jars similar to a slide hammer, there is a shaft that travels inside a tube.
Tube jars can be used in place of mechanical link jars.
Tube jars typically function better in gas condition rather than fluid due to bypass restrictions.
Applications:
Tube jars can be used in situations where tools string length is restricted.
Size | 0.75" | 1.00" | 1.25" | 1.50" | 1.75" |
Thread Connections | 0.50-11 UNC | 0.938-10 UN | 0.938-10 UN | 1.062-10 UN | 1.062-10 UN |
Fishneck (") | 0.75" | 1.00" | 1.187" | 1.375 | 1.75" |
Fishneck (mm) | 19.05mm | 25.4mm | 30.14mm | 34.93mm | 44.45mm |
Maximum OD (") | 0.75" | 1.00" | 1.25" | 1.50" | 1.75" |
Maximum OD (mm) | 19.05mm | 25.4mm | 31.75mm | 25.4mm | 44.45mm |
Stroke (") | 10.00" | 14.00" | 20" | 20" / 30" | 20" / 30" |
Stroke (mm) | 254mm | 355.6mm | 508mm | 508 / 762mm | 508 / 762mm |
Size | 1.875" | 2.125" | 2.50" | 2.75" |
Upper Thread | .625 UNC | 0.938-10 UN | 0.938-10 UN | 1.062-10 UN |
Fishneck (") | 1.75" | 1.75" | 2.31" | 2.31" |
Fishneck (mm) | 44.45mm | 44.45mm | 58.67mm | 58.67mm |
Maximum OD (") | 1.875" | 2.125" | 2.50" | 2.75" |
Maximum OD (mm) | 47.62mm | 53.98mm | 63.50mm | 69.85mm |
Stroke | 20" / 30" | 20" / 30" | 20" / 30" | 20" / 30" |
Stroke (mm) | 508 / 762mm | 508 / 762mm | 508 / 762mm | 508 / 762mm |
*Alternate thread configurations, sizes, and lengths available upon request
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING
Pressure Controls Inc.
3904 – 53rd Avenue NW
Edmonton, Alberta
T6B 3N7
780-670-2020
Office hours are Monday to Friday
8:00 am to 4:30 pm.
DISCLAIMER: TRADEMARKS: Halliburton, Otis, Baker, and Camco as well as any related products referenced herein are either trademarks or registered trademarks of the forementioned. Other product and company names mentioned herein may be trademarks of their respective owners