The X/R type checkset tool provides a means of identifing if a particular X / R type lock has properly been set into a profile of the corresponding size.
The X/R type check set tool has a pin that will shear of the fishneck of the lock mandrel is completely colapsed, this is accomplished by simpey locating the lock with the checkset tool, and lightly jarring down.
Should the pin not be sheard or unmarked once retrieved, it would be an indication that the lock mandrel is incorrectly set.
Size | 1.50"-1.71" | 2.00" | 2.125" | 2.188" | 2.31 - 2.56" | 2.75"-2.81" |
Fishneck OD (") | 1.188" | 1.375" | 1.375" | 1.375" | 1.375" | 1.75" |
Fishneck OD (mm) | 30.18mm | 30.18mm | 30.18mm | 30.18mm | 30.18mm | 44.45mm |
Maximum OD (") | 1.406" | 1.835" | 2.065" | 2.16 | 2.28" | 2.68" |
Maximum OD (mm) | 35.71mm | 46.61mm | 52.45mm | 54.86mm | 57.91mm | 68.07mm |
Upper Thread Conn. | 0.938-10UN | 0.938-10UN | 0.938-10UN | 0.938-10UN | 0.938-10UN | 1.062-10UN |
*Smaller or larger sizes available upon request, as well as custom materials
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING
Pressure Controls Inc.
3904 – 53rd Avenue NW
Edmonton, Alberta
T6B 3N7
780-670-2020
Office hours are Monday to Friday
8:00 am to 4:30 pm.
DISCLAIMER: TRADEMARKS: Halliburton, Otis, Baker, and Camco as well as any related products referenced herein are either trademarks or registered trademarks of the forementioned. Other product and company names mentioned herein may be trademarks of their respective owners