COMPLETION EQUIPMENT
Pump Out Plug – Ball Drop
The Ball Drop Pump Out plug is utilized when there is a need to blank the tubing off while
running into the wellbore, once the tubing has been landed, the plug can be pumped off, or knocked out mechanically.
Applications:
Used to set hydraulic packers or related pressure activated equipment.
Used to pressure test bottom hole assemblies.
the wellbore or production tubing while running in the wellbore.
Used to circulate wellbore to inhibited fluid before dropping ball to set hydraulic packers or related equipment.
| Size | 1.660" | 2.062" | 2.375" |
| Upper Thread Conn. | 1.660 NUE Box | 1.900 EUE Box | 2 3/8" EUE Box |
| Lower Thread Conn. | 1.660 NUE Pin | 1.900 EUE Pin | 2 3/8" EUE Pin |
| Maximum OD (") | 2.20" | 2.50" | 3.062" |
| Maximum OD (mm) | 55.88mm | 63.50mm | 77.77mm |
| Minimum ID (") | 1.38" | 1.516" | 1.99"" |
| Minimum ID (mm) | 35.05mm | 38.50mm | 50.565mm |
| Set Screw | 0.25"NC x 0.375" | 0.25"NC x 0.375" | 0.25"NC x 0.375" |
| Shear Value / Screw | 225 psi | 225 psi | 225 psi |
| Size | 2 7/8" | 3 1/2" | 4 1/2" |
| Upper Thread Conn. | 2 7/8" EUE Box | 3 1/2" EUE Box | 4 1/2" EUE Box |
| Lower Thread Conn. | 2 7/8" EUE Pin | 3 1/2" EUE Pin | 4 1/2" EUE Pin |
| Maximum OD (") | 3.668" | 4.50" | 5.563" |
| Maximum OD (mm) | 93.17 mm | 114.30mm | 141.30mm |
| Minimum ID (") | 2.25" | 2.99" | 3.958" |
| Minimum ID (mm) | 57.15 mm | 75.94mm | 100.53mm |
| Set Screw | 0.25-20 UNC x 0.375" | 0.25"NC x 0.375" | 0.25"NC x 0.375" |
| Shear Value / Screw | 225 psi | 225 psi | 225 psi |
*Smaller or larger sizes available upon request, as well as custom materials
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING
