FISHING TOOLS
Sheeps Foot Cutter Bar
To cut wire from stuck toolstrings.
The sheep’s foot cutter bar is similar to that of a section of the stem without the threaded connections.
On the upper end of the sheep’s foot cutter bar is a fishing neck profile, with the bottom face being cut at an angle.
A narrow slot is cut the length of the body, and a retaining bar the size of the slot is held in place with a series of spring pins through both the outer edge and bar.
The thickness of the retainer bar is narrow to allow the line to move freely behind it.
Sheep’s foot cutters generally come in three and five foot lengths.
The body O.D. measurements are affected by the tubing size, threaded guides may be utilized.
Applications:
Cutting wireline, slickline, or cable at the top of a rope sockets that may have become stuck in the wellbore.
Cutting wireline, slickline, or cable from the top of Go-Devils in the wellbore.
| Size | 1.00" | 1.25" | 1.50" | 1.75" | 2.125" |
| Fishneck (") | 1.00" | 1.187" | 1.375" | 1.75" | 1.75" |
| Fishneck (mm) | 25.4mm | 30.15mm | 34.93mm | 44.45mm | 44.45mm |
| Over all Length (") | 3.00' / 5.00' | 3.00' / 5.00' | 3.00' / 5.00' | 3.00' / 5.00' | 3.00' / 5.00' |
| Over all Length (mm) | 1.5 / 0.9 m | 1.5 / 0.9 m | 1.5 / 0.9 m | 1.5 / 0.9 m | 1.5 / 0.9 m |
| Maximum OD (") | 1.00" | 1.25" | 1.50" | 1.75" | 2.125" |
| Maximum OD (mm) | 25.4mm | 31.75mm | 38.1mm | 44.45mm | 53.98mm |
| Maximum Line Size | 0.108 | 0.150" | 0.218" | 0.250" | 0.250" |
*Available with locator rings to centralize in the wellbore
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING
