RUNNING TOOLS
BX Running Tool
Used to set type R / RN lock mandrels both selectively of non selectively in cprresponding profiles.
The BR running tool can be set into selective at surface if there is more than one selective nipple in the wellbore.
Applications:
Used to land and set blanking plugs in pre-determined profiles.
Used to land bottom hole choke assemblies in pre-determined profiles.
Used to land and set bottom hole instruments below lock mandrels.
Used to land and set sub surface safety valves.
| Size | 1.25" | 1.50" | 1.625" | 1.87" | 2.31" | 2.75" |
| Fishneck OD (") | 1.00" | 1.188" | 1.188" | 1.375" | 1.75" | 2.31" |
| Fishneck OD (mm) | 25.40mm | 30.18mm | 30.18mm | 34.93mm | 44.45mm | 58.67mm |
| Max OD Dogs Exp(") | 1.313" | 1.562" | 1.672" | 1.937 | 2.359" | 2.843" |
| Max OD Dogs Exp (mm) | 44.70mm | 44.43mm | 49.12mm | 49.12mm | 59.92mm | 72.21mm |
| Min OD Dogs Ret (") | 1.156" | 1.41" | 1.593" | 1.75" | 2.175" | 2.718" |
| Min OD Dogs Ret (mm) | 41.66mm | 44.45mm | 44.45mm | 44.45mm | 55.25mm | 69.04mm |
| Upper Thread Conn. | 0.625-11N | 0.938-10UN | 0.938-10UN | 0.938-10UN | 0.938-10UN | 1.062-10UN |
| Lower Thread Conn. | 0.375-16UN | 0.375-16UN | 0.375-16UN | 0.50-13UN | 0.625-11UN | 0.75-10UN |
| Size | 2.81" | 3.31" | 3.81" | 4.56" |
| Fishneck OD (") | 2.31" | 2.313" | 2.313" | 3.125" |
| Fishneck OD (mm) | 58.67mm | 58.75mm | 58.67mm | 79.38mm |
| Maximum OD Dogs Exp(") | 2.906 | 3.406" | 3.89" | 4.67" |
| Maximum OD Dogs Exp (") | 73.81mm | 86.51mm | 98.81mm | 118.62mm |
| Minimum OD Dogs Ret (") | 2.718" | 3.25" | 3.75" | 4.48" |
| Minimum OD Dogs Ret (mm) | 69.04mm | 82.55mm | 95.25mm | 113.79mm |
| Upper Thread Conn. | 1.062-10UN | 1.062-10UN | 1.062-10UN | 1.062-10UN |
| Lower Thread Conn. | 0.75-10UN | 1.375-12UN | 2.125-12UN | 2.375-12UN |
*Alternate thread configurations, sizes, and lengths available upon request
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING
