RUNNING TOOLS
C1 Running Tool
The C1 running tool is used for running and setting the various types of Baker style lock mandrels or bypass blanking plugs.
The C1 running tool can typically be used for any of the baker style equipment that utilizes an external fishing neck.
The C1 running tool utilizes no-go rings to prevent the running tool from passing through profiles with the pre-determined sub surface tools attached or pinned to the runnig tool.
Applications:
The C1 running tool can be used to run or set and of the Baker style S/W/Z lock mandrels along with the desired equalzing assemblies.
The C1 running tool can be used to set bottom hole chokes, bypass equalizing plugs, safety valves, or regulators
| Size | 1.50" | 2.00" | 2.50" | 3.50" |
| Fishneck OD (") | 1.188" | 1.375" | 1.75" | 1.75" |
| Fishneck OD (mm) | 34.93mm | 34.93mm | 44.45mm | 44.45mm |
| Maximum OD (") | 1.75" | 2.18" | 2.71" | 2.71" |
| Maximum OD (") | 44.45mm | 55.37mm | 68.83mm | 68.83mm |
| Upper Thread Conn. | 0.938-10 UN | 0.938-10 UN | 1.062-10UN | 1.062-10UN |
| ACCESSORY | RUNNING TOOL | LOCATING RING |
| SIZE | SIZE | OD |
| 1.18 | 1.66" | 1.219 |
| 1.25 | 1.66" | 1.281 |
| 1.43 | 1.900-2.062" | 1.468 |
| 1.5 | 1.900-2.062" | 1.52 |
| 1.56 | 1.900-2.062" | 1.593 |
| 1.62 | 1.900-2.062" | 1.656 |
| 1.78 | 2.375" | 1.807 |
| 1.81 | 2.375" | 1.843 |
| 1.87 | 2.375" | 1.906 |
| 2.25 | 2.875" | 2.281 |
| 2.31 | 2.875" | 2.343 |
| 2.75 | 3.50" | 2.781 |
| 2.81 | 3.50" | 2.843 |
*Alternate thread configurations, sizes, and lengths available upon request
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING
