FISHING TOOLS
Go-Devil
To provide a platform to cut wire from stuck toolstrings or wire nests.
The go-devil is similar to that of a section of the stem without the threaded connections.
On the upper end of the sheep’s foot cutter bar is a fishing neck profile, the bottom is flat.
A narrow slot is cut the length of the body, and a retaining bar the size of the slot is held in place with a series of spring pins through both the outer edge and bar.
The thickness of the retainer bar is narrow to allow the line to move freely behind it.
Sheep’s foot cutters generally come in three and five foot lengths.
The body O.D. measurements are affected by the tubing size, threaded guides may be utilized.
Applications:
Providing a solid platform to cut wire or slickline if utilizing a sheep’s foot or other cutter.
| Size | 1.00" | 1.25" | 1.50" | 1.75" | 2.125" |
| Fishneck (") | 1.00" | 1.187" | 1.375" | 1.75" | 1.75" |
| Fishneck (mm) | 25.4mm | 30.15mm | 34.93mm | 44.45mm | 44.45mm |
| Over all Length (") | 3.00' / 5.00' | 3.00' / 5.00' | 3.00' / 5.00' | 3.00' / 5.00' | 3.00' / 5.00' |
| Over all Length (mm) | 1.5 / 0.9 m | 1.5 / 0.9 m | 1.5 / 0.9 m | 1.5 / 0.9 m | 1.5 / 0.9 m |
| Maximum OD (") | 1.00" | 1.25" | 1.50" | 1.75" | 2.125" |
| Maximum OD (mm) | 25.4mm | 31.75mm | 38.1mm | 44.45mm | 53.98mm |
| Maximum Line Size | 0.108 | 0.150" | 0.218" | 0.250" | 0.250" |
*Smaller or larger sizes available upon request / lengths may vary
PLEASE STATE PART DESCRIPTION AND SIZE WHEN ORDERING
